Top 10 Best Leaf Guard Gutter System: Say Goodbye to Clogged Gutters with These Top Picks

Are you facing the problem of leaf debris in front of your home? are you sick and tired of constantly having to unclog your gutters and downspouts?  Tired of overflowing gutters? I was facing this problem too but I found the solution, which is leaf guard gutter system.

Leaf Gutter Guards will work well especially if you have a home with large trees. It is important to have gutter guards. It will prevent your gutter from rusting. In heavy rainfall, your gutters will not clog. Thus it will keep debris, sand, leaves, and other unwanted pest out from entering your gutters.

With having Gutter Guards. Gutter maintenance is much easier. Normally Gutters require cleaning twice a year in the spring and fall.

Cleanings are easier and required less often with gutter screens installed. Less gutter cleaning also means less of the safety risk that comes with gutter cleaning, like working on a ladder. So it is important to have Gutter Guards installed at your home.

In this article, we’ll provide you 10 best leaf guard gutter system on the market.

List of 10 Best Leaf Guard Gutter System – Reviews & Buying Guide

When it comes to buying the right tools there’s a lot to look out for that’s why today we’re going to review the 10 best Leaf Guard Gutter System models for you and we’ve ranked them by many different factors such as product features price performance and more

Without further ado let’s jump in!

1. A-M Aluminum Gutter Guard Sample Pack – Includes Both 5 inch and 6-inch Width Samples (7-inch in Length, Mill Finish)

BEST OVERALL

A-M Aluminum Gutter Guard Sample Pack – Includes Both 5 inch and 6-inch Width Samples

The Difference is In the Design. Heavy (Industrial) Gauge .018 100% Aluminum will not rust – Lifetime warranty covers no rust

(7-inch in Length, Mill Finish)

If you are looking for high-quality material and patented design leaf guard gutter at a low price with high performance, and durability, our first option A-M Aluminum Gutter Guard is one of the best Leaf Guard Gutter and one of the most sold guard gutters on the market.

This leaf gutter guard comes with a unique bubbled filtration system that allows rainwater to pass through, as well as a patented design while leaving debris to dry and blow away.

This product comes with a maintenance-free design not only keeps debris from sticking but also promotes airflow from top and bottom allowing debris to dry and blow away in winds as low as 5mph.

A-M Aluminum Gutter Guard comes with a unique design, The design also allows this product to be installed on all types of hangers including hidden hangers but also the older style spike and farrow. These features make this product the best choice for any homeowner or installer.

This product comes also with a tabbed for easy installation, the tabs make it easy to install our gutter guards creating a seamless finish. In addition to that Designed for quick screw hangars and Designed specifically for hidden hangars but works well with all hangars including K-style hangars

Here is the specification of the A-M Aluminum Gutter Guard Sample Pack:

Pros:

• Designed specifically for hidden hangers but works with all hangers
• Heavy gauge .018 – 100% aluminum will never rust
• Invisible from the ground
• Handles downpours
• Pest and weather (snow/ice) resistant
• Easy to install on new or existing gutters
• Does not install under shingles avoiding any damage to shingles
• Eliminates gutter clogging
• No more sitting in your living room watching a nice rain shower only to be reminded your gutters are clogged and overflowing
• No more flooded basements due to clogged and overflowing gutters
• No more ladder climbing
• No more gutter cleaning

Cons:

• Difficult to install

2. Stainless Steel Micro-Mesh, Raptor Gutter Guard: A Contractor-Grade DIY Gutter Cover That fits Any roof or Gutter type-48ft to a Box and fits a 6″ Gutter.

BEST VALUE

Stainless Steel Micro-Mesh, Raptor Gutter Guard

A Contractor-Grade DIY Gutter Cover That fits Any roof or Gutter type-48ft to a Box and fits a 6″ Gutter

Stainless steel micro-mesh blocks leaves, pine needles and roof grit from entering your gutter.

Looking for Stainless steel micro-mesh blocks leaves, pine needles, and roof grit from entering your gutter, also easy to install in any home roof, our second option Stainless Steel Micro-Mesh, Raptor Gutter Guard is one of the great choices on the market nowadays.

This leaf guard gutter is made of Aluminum and stainless steel materials to withstand the elements year after year and won’t warp, crack, or rust.

The Raptor Gutter Guard is designed to work with any gutter and roof type. There’s no need to worry about what style of roof or gutter you have, Raptor Gutter Guard filtration is one of a kind.

These gutter guards work like a fine-mesh strainer, prohibiting even tiny particles from polluting rainwater catchments.

This product gutter guard comes with V-Bend technology and offers superior efficiency in water filtration and self-cleaning capabilities. It also adds rigidity to the mesh, helping it withstand heavier debris without sagging.

The latest advancement in gutter guard technology. Provides maximum water filtration while vastly improving overall performance.

This portion of the gutter guard holds the mesh in place and offers superior strength and performance.

Here is the specification of the Stainless Steel Micro-Mesh, Raptor Gutter Guard:

Pros:

• Easy to install on any 6″ or 7″ gutter
• Designed, Assembled, and Packaged in the USA
• Backed by a 25-year warranty and a world-class
• Includes self-tapping, corrosion-resistant screws, and a magnetic hex head driver.
• Materials That Stand The Test Of Time
• Rainwater Harvesting
• V-Bend Technology
• Advanced Trough Technology
• Extrusion
• High-quality material long-lasting
• Comes with an installation guide

Cons:

• The sample pack is too small

3. Gutter Guard 3 Inch Expand Aluminum Filter Strainer. Stops Blockage Leaves Debris. Pack of 4. by Massca (Aluminum 3 inch)

RUNNER-UP

Gutter Guard 3 Inch Expand Aluminum Filter Strainer.

Stops Blockage Leaves Debris. Pack of 4. by Massca (Aluminum 3 inch)

Gutter guards filter enable more efficient rainwater harvesting by improving the flow of water

If you looking to stop Stops Blockage Leaves Debris, and want to save Your Precious Time & Effort, then our third option Gutter Guard 3 Inch Expand Aluminum Filter Strainer is one of the best leaf gutter guards on the market nowadays.

Sick and tired of constantly having to unclog your gutters and downspouts? With heavy-duty gutter guards, you now make sure that your gutters and downpipes are protected from leaf debris, roof moss, twigs, and dirt.

Unlike other impractical gutter filters, the Massca downpipe leaf guards can be installed in seconds without using any tools. You don’t have to be an expert or call a professional. Simply push them into place and you’re good to go!

This leaf guard gutter is made of non-corrosive, weatherproof, and waterproof aluminum, our robust gutter guards will pass the test of time.

Rest assured that they will stay firmly in place no matter the weather conditions and you’ll not have to climb up the roof again to re-install them!

By preventing leaf debris, twigs, roof moss, and dirt from clogging your pipes, you can easily make sure that your guttering system stays in perfect condition for longer without the need for costly repairs and constant unclogging.

You can try our 4-pack of sturdy downpipe gutter filters for 30 days risk-free and if by that time you’re not 100% thrilled with their performance, we promise to offer you a prompt and full refund.

Here is the specification of the Gutter Guard 3 Inch Expand Aluminum Filter Strainer:

Pros:

• Save Your Precious Time & Effort
• Install Them In Seconds
• Heavy-Duty Construction
• High-quality material
• A Must-Have for Every Guttering System
• 100% Satisfaction or Your Money Back
• Easy to remove
• Easy to use
• Enable more efficient rainwater harvesting
• Prevent the build-up of stagnant water in your gutters

Cons:

• Screen holes to big

4. Amerimax Home Products 636025 Lock-In Gutter Guard, Black (Pack of 25)

ALSO CONSIDER

Amerimax Home Products 636025 Lock-In Gutter Guard, Black (Pack of 25)

Compatible with 4″, 5″, and 6″ metal (steel or aluminum) K-style gutters

The tight expanded metal mesh pattern keeps out most debris, to keep your gutters flowing freely.

Our fourth option is Amerimax Home Products 636025 Lock-In Gutter Guard if you looking for easy installation and long life and high-quality material leaf guard gutter, this choice is a great product to go with.

Use the Amerimax 3′ Lock-In Gutter Guard to help protect your gutter from filling with debris. These gutter guards are compatible with 4″, 5″, & 6″ metal K-style gutters and the pre-notched design allows for overlapping which eliminates gaps between the guards.

The tight expanded metal mesh pattern keeps out most debris, to keep your gutters flowing freely. Easy to install, simply slide the flat side under the shingle and lock the curved portion into the front edge of the gutter.

This product is made of durable powder-coated steel, this product is designed to handle high-volume water flow and hold up to heat and cold better than vinyl gutter guards. Includes a 10-year limit and is Made in the USA.

Amerimax 3′ Lock-In Gutter Guard Constructed of durable powder-coated steel for long life and protection from the elements, and neutral color blends seamlessly with the roofline, In addition to that easy “lock-in” installation, simply slide under the first row of shingles and lock the gutter guard to the front lip of the gutter

This product also comes with a bunch of features such as Rolled edge locks to the gutter for a strong grip, filters leaves, and debris, holds up against tough conditions, handles heavy rains and storms

Here is the specification of  Amerimax Home Products 636025 Lock-In Gutter Guard:

Pros:

• Self-Locking Installation
• Clog-Free Gutters
• Powder-Coated Steel
• High Volume Water Flow
• Made in the USA
• High-quality material
• Long-lasting
• Handle high-volume water flow
• Good price
• Easy to install
• 3′ Lock-In™ Gutter Guard

Cons:

• Doesn’t fit 4 inches of gutter

5. Frost King VX620 6″x20′ Plastic Gutter Guard

GREAT OPTION

Frost King VX620 6″x20′ Plastic Gutter Guard

6″ x 20′ Plastic Mesh Gutter Guard. Prevents leaves and debris from blocking gutter. Can be easily unrolled, cut and shaped with ordinary scissors. Will not rust or corrode. Will be sure to last for years to come.

Our fifth option in our list is Frost King VX620 6″x20′ Plastic Gutter Guard, if you’re looking searching for a high-quality material guard gutter to prevent leaves and debris from blocking the gutter, then this option is great for you and one of the best leaf guard gutter on the market and one of the most sell, according to its performance, quality, price…

this Frost King VX620 6″x20′ Plastic Gutter Guard is Made of durable, flexible plastic mesh, The Plastic Mesh Gutter Guard can be easily unrolled, cut to length with a pair of scissors, and quickly installed on any type of gutter, and Keeps gutters free of leaves, protects gutters and downspouts, and lasts for years.

The Frost King  6-in x 20-ft plastic mesh gutter guard is a quick, inexpensive, and easy solution to prevent piled-up leaves and debris in the gutters. The black color mesh blends with the roof line and is barely visible.

Frost King gutter guard has expanded to help you save money and energy in just about every corner of your home During the winter.

Frost King products will keep the cold air out, insulate your pipes and protect your rooftops from freezing snow. In the summer, as well as keeps gutters clean, protects your home from leaks and cuts air conditioning costs.

Here is the specification of Frost King VX620 6″x20′ Plastic Gutter Guard:

Pros:

• Keeps leaves and debris from clogging gutters
• Will not rust or corrode
• Cut to length with a Pair of ordinary scissors and quickly installed
• Can be easily unrolled
• 6″ X 20′ Plastic Mesh Gutter Guard
• Long-lasting
• Made from durable material 
• Gutter Girders required for installation-sold separately
• For use with 5″ K style gutters
• Made from durable material 
• Easily trims to size with sharp scissors

Cons:

• Difficult to install

6. LeafTek DIY Gutter Guards | 5″ x 200′ of Leaf Protection in Black | Premium Contractor Grade 35 Year Aluminum Covers | Available in 32′, 100′ & 200′ Packages | 5 or 6 Inch | Made in The USA

ALSO CONSIDER

LeafTek DIY Gutter Guards | 5″ x 200′ of Leaf Protection in Black

Premium Contractor Grade 35 Year Aluminum Covers | Available in 32′, 100′ & 200′ Packages | 5 or 6 Inch | Made in The USA

LeafTek keeps leaves, twigs, pine needles, seeds, elephants (just seeing if you’re paying attention) 

Our sixth choice in our list for those who looking for premium material and long-lasting leaf guard gutter to prevent and collect debris, if you are tired of overflowing gutters then this LeafTek DIY Gutter Guard is one of the great options in the market.

Leadtek’s unique raised vented ridge design promotes air circulation through your gutter system which helps dry out any standing leaves and debris.

The proprietary design allows rainwater from even the heaviest storms to pass through into your gutters while stopping leaves and all other debris from clogging your system.

Leadtek’s raised ridged design facilitates leaves and debris to blow off with the slightest breeze. The down-draft ridge design helps dry out standing water that may pool in your gutters discouraging mosquito and other pest breeding.

All LeafTek sections are packaged and shipped in easy-to-handle 4-foot lengths. Each section has a 1/2″ tab on one end which the adjoining section slides over for a seamless installation.

End pieces and corners are cut easily with a pair of tin snips. We even include a magnetic hex drive for your convenience!

Leadtek has 404 holes per square foot!

Each hole is 1/8″ in diameter and designed to handle massive rainfalls while stopping leaves and debris from entering your gutters.

Our 1/8″ hole diameter also prevents “shingle sediment” and other small granular debris from clogging LeafTek, unlike micro-mesh systems.

Here is the specification of LeafTek DIY Gutter Guards:

Pros:

• 100% Made In The USA
• Easy to install 4′ sections
• Strengthens your gutters
• Thick .019 gauge USA aluminum
• Stainless steel, self-tap color-matched screws included
• Hard as nails enamel finish | Proprietary vented raised ridge air flow design
• Corners install easily
• Does NOT install under your shingles, therefore will not void your roof’s warranty
• Free shipping
• Keeps everything out
• No Overflow
• Easy, Do-It-Yourself Installation…

Cons:

• No screw for installation

7. E-Z-GUTTER GUARD EZ-Quick-10 Gutter Guard, Silver

GREAT CHOICE

E-Z-GUTTER GUARD EZ-Quick-10 Gutter Guard, Silver

Includes ten 4-foot sections – entire box installed covers 39. 2 feet; Each section notched for ¾-inch in overlap

Easy to install – no screws needed; snaps out for maintenance

If you’re searching for an unbreakable and no pre-clog filter gutter guard with premium quality material, our seventh option E-Z-GUTTER GUARD EZ-Quick-10 Gutter Guard is one of the best leaf guard gutter systems for your roof.

These hardworking new aluminum mesh guards are made by E-Z-Gutter, the leader in gutter protection. Since 1983, E-Z-Gutter has been engineering innovative designs for every type of gutter and debris load.

E-Z-Quick gutter guards are a snap to install. No screws are needed. Each section is notched for a 3/4-inch overlap., as well as the heavy-duty expanded aluminum won’t rust or rot. Tension-engineered to stay put during rough weather, the guards easily snap out for maintenance.

The tight mesh keeps debris out while letting rainwater rush through. Each box of guards will cover 40 feet of gutter. also, E-Z-Quick-10 Gutter Guards are designed to fit most 5″ gutters that are used in over 80% of today’s homes.

This leaf guard gutter tight mesh keeps debris out while letting rainwater rush through; Pine needles and other very small debris may pass thru the screen; E-Z-Shield should be used in areas where this may occur

This product is not designed for plastic gutters; fits only a 5” residential K-style gutter with hidden hangers, In addition to that made of durable material also designed to stay put during rough weather.

Here is the specification of the E-Z-GUTTER GUARD EZ-Quick-10 Gutter Guard:

Pros:

• Includes ten 4-foot sections
• Entire box installed covers 39. 2 feet
• Easy to install
• Heavy-duty expanded aluminum won’t rust or rot
• Not designed for plastic gutter
• Limited Lifetime Warranty
• No UV Breakdown
• No Hinge to Snap On
• No Collapsing Plastic
• No Pre-Clog Filter
• High-quality material

Cons:

• Doesn’t fit 5 inches of gutter

8. FlexxPoint 30-Year Gutter Cover System, Brown Residential 5″ Gutter Guards, 102ft

ALSO CONSIDER

FlexxPoint 30 Year Gutter Cover System, Brown Residential 5″ Gutter Guards, 102ft

Available in White, Matte Aluminum, Thermal Thaw Black and Brown. Now made from Fully Hardened High Strength .019 Heavy Gauge Aluminum!

Easy to Install, Contractor pricing, Includes 1/2″ #8 Stainless Steel Zip Screws.

If you are the handy sort and you want to save some money by installing the guards yourself, Our eight  FlexxPoint 30-Year Gutter Cover System is a great choice for you, this option is cost-effective, easy to install, and performs beautifully under real-world conditions.

This leaf gutter guard is Engineered to stand up to time and the elements, it’s one of the best leaf guard gutter systems for your home.

FlexxPoint mounts permanently and securely to the front lip of the gutter system and mounts directly into the fascia board with provided stainless steel 1/2″ #8 zip screws. Once installed, it is a permanent addition to your gutter system, never having to be removed.

It comes with a unique 3-Point design that prevents water overflow and potential foundation damage by acting as a dam, slowing water flow over the cover and allowing full drainage into your gutters, even when covered by wet leaves and debris.

FlexxPoint Gutter Covers will never clog, as FlexxPoints 3-point design allows airflow by elevating wet leaves and other debris off of the cover surface, preventing them from sticking to the cover. Over time, light wind and other natural elements simply blow away the dried leaves and debris.

FlexxPoint gutter covers will NOT void roof warranties unlike other products that slide under shingles, as well as designed to be easy to set up this gutter guard blends nicely with the gutters and is hardly visible from ground level 

FlexxPoint Gutter Covers are manufactured in the USA and made of durable material, also FlexxPoint Gutter Covers are available in 6” commercial size.

Here is the specification of the FlexxPoint 30-Year Gutter Cover System:

Pros:

• Made of domestic aluminum
• Installation fastener
• 4 Easy-to-handle 4-foot sections
• Stainless steel fastener
• Does NOT void roof warranties
• Cannot be seen from the ground
• Blocks all types of debris
• Clog free
• High-volume water flow
• Contractor pricing
• Includes 1/2″ #8 Stainless Steel Zip Screws
• Made from Fully Hardened High Strength

Cons:

• Not for cold climates

9. The Wedge Downspout Gutter Guard

RECOMMENDED

The Wedge Downspout Gutter Guard

4-PACK: Secures in downspout but unlike filters and strainers, works toward removing leaf build-up through its Wedge design – allows leaves to push up, dry off and blow out of the gutters!

Our ninth option in our list this choice is for those who looking for a good price and simple leaf guard gutter for their home roof to prevent and collect leaves, Full gutter guard systems cost thousands of dollars to install.

The Wedge Downspout Gutter Guard provides alternative solutions at a fraction of the cost. 

The patented flow-thru design of the Wedge directs leaves and debris to float up and away from the downspout opening, keeping it clear so rainwater can drain quickly and efficiently.

This gutter guard is Independently tested by Consumer Test Labs, The Wedge Downspout Gutter Guard is sloped to allow water to flow through the top, bottom, both sides, and back, providing increased drainage over conventional rain gutter filters.

This leaf gutter guard is Designed to fit and tested to function on 5-inch gutters with standard downspouts with a 2″ x 3″ opening.

Secures in downspout but unlike filters and strainers, works toward removing leaf build-up through its Wedge design, and allows leaves to push up, dry off and blow out of the gutters! Connectors Included To Connect Wedges For Downspouts Located Away From Corners of a Home

The guards will arrive flat but take only minutes to assemble with no tools required.

Here is the specification of The Wedge Downspout Gutter Guard:

Pros:

• 4-pack
• Fits All 2 in by 3 in Standard Downspouts
• Fits best in standard 5″ gutters
• Easy To Install
• Made in the USA
• Lightweight
• Keep Gutters Flowing
• Good price
• Eliminates Messy Clogging By Directing Leaves and Debris Away From Downspout Openings

Cons:

• Clogs fast

10. Air Jade Gutter Guard 5”, Super-Fine Coated Stainless Steel Mesh Needle and Leaf Filter, DIY and Modify for Universal Fit Any Roof or K-Style or Other Gutter System, 15 Pack in Box (48ft)

ALSO CONSIDER

Air Jade Gutter Guard 5”, Super-Fine Coated Stainless Steel Mesh Needle and Leaf Filter

DIY and Modify for Universal Fit Any Roof or K-Style or Other Gutter System, 15 Pack in Box (48ft)

Effective Leaf Guard – Block pine needles, leaves, seed pods and debris, allow large water flow and avoid gutter blockage

Looking for an effective leaf guard with tough Mesh and universal fit our last option Air Jade Gutter Guard is one of the great choices for DIY and Modify for Universal Fit on Any Roof or K-Style or Other Gutter Systems, it’s one of the best leaf guard gutter system on the market.

Air Jade Gutter Guard is an effective leaf guard Stainless steel mesh with super-fine openings, the mesh is designed to block pine needles, leaves, seed pods, and debris.

The mesh can absorb water quickly, and easily handle large water flows of heavy rain and stormy weather, as well as Made of weather-resistant stainless steel material, with an epoxy-coating finish as double protection for the mesh, strong and light-weighted.

This leaf guard gutter Fits standard gutter up to 5” wide, measures 39 3/8″ per piece, a total of 48ft in length, and is easy to cut and bend to fit any roof and gutter system, including a k-style gutter system.

This product comes with Heavy gauge stainless steel mesh that is tough enough to hold even in winter with heavy snow, as well as Super-fine expanded stainless steel mesh with a delicate epoxy-coating finish, that won’t rust or rot even in harsh environments.

Here is the specification of The Wedge Downspout Gutter Guard:

Pros:

• DIY and Modify for Universal Fit Any Roof or K-Style or Other Gutter System
• 15 Pack in Box (48ft)
• High-quality material
• Super-Fine Coated Stainless Steel Mesh Needle and Leaf Filter
• Effective Leaf Guard
• Block pine needles, leaves, seed pods, and debris
• Allow large water flow and avoid gutter blockage
• Built for Durability
• Tough Mesh
• Water Absorbing Mechanism
• Designed to provide the best protection for your gutter system

Cons:

• Necessary hardware Provided – Including self-drilling screws and magnetic hex driver

What to consider when choosing the best leaf Gutter System for you home?

Several criteria must be considered when it comes to selecting a proper gutter protection system for your home. Make sure you analyze all your needs thoroughly to select the gutter protection system that best meets your requirements.

1. Materials used to produce the leaf guard

All gutter guards are not equal. To begin with, certain materials are stronger than others. For instance, aluminum gutter guards are generally more durable than those made of vinyl or plastic. On the other hand, they are often more costly.

Secondly, some products retain more debris on top of the gutters. Consequently, if the latter are shielded from the wind, leaves are more likely to remain on the gutter protection itself. Likewise, foam or sponge inserts tend to hold more debris than other types of leaf guards.

2. Gutter protection installation

If you plan on installing gutter protection yourself, you won’t have access to the same kind of products as when you call upon the services of a professional.

Generally, the products that require a more complex installation are reserved for professional installers. They are much stronger products as they go under the shingles or are attached to screws.

3. Types of debris collecting in gutters

The primary function of gutter protection is to prevent leaves and other debris from getting inside the gutter. As a result, it is important to select a model with perforated holes that won’t let in the kind of debris that is most commonly found on your property.

Thus, the smaller the holes, the better the gutter protection will work to effectively retain small leaves, samaras (helicopters), pine needles, and shingle residue.

4. Rainfall and snowfall in your area

Based on where you live, as well as the slope of your roof and the materials it is made of, rainfall may collect in the gutter more abruptly and in larger amounts.

You must therefore install gutter protection that will drain a larger quantity of water under such circumstances. In addition, during winter, snow can add considerable weight on top of the gutter protection system.

As snow generally remains on top of the gutter guard, a stronger product (e.g., one that is screwed in or made of metal) is necessary when heavy snowfalls are expected.

5. Roof

Look at your roof composition shingles are the most common type of roofing material: metal, slate, tile, and wood shape roofing are also used throughout the world

Your roofing material along with the design and pitch of your roof will affect your gutter guards will perform pay attention to the trees around your home

What should I look for when buying leaf gutter guards?

We will provide you with 3 main types of leaf gutter guards there are many other types but they are not important and the majority of people buy these 3 main gutter guards.

Without further ado let’s jump in!

1. Gutter screen

Gutter screens are exactly what they sound like. They’re a screen-like material that will cover your gutter and let in water, but not most debris.

They have two main strengths, and that is their affordability and their ease of cleaning. And you may be asking yourself right now, I have a gutter guard, isn’t the entire point that I don’t have to clean my gutters anymore?

To some true extent. You’ll still have to clean your gutters, unfortunately, but gutter guards of all varieties, make it to where you have to clean your gutters, far less often.

There’s a trend that you’ll notice moving forward, where the easier a gutter with a gutter guard attached to it is to clean, then the more often you’re gonna need to clean that.

Gutter screens are the easiest ones to clean because all you have to do is just lift them up and then you can get to everything that’s gone through the gutter screen, into your gutters.

the way gutter screens are designed is that they won’t block the smaller debris like your maple seed helicopters or your pine needles. So maybe not the best choice, if you’re surrounded by pine trees.

What gutter screens do block?

will just get simply stuck on top of the gutter screen, but it’s gonna rely on wind to knock it off. So, if you go a long period without having any wind, then you may see some building up of debris like your larger leaves and your twigs on top.

They’re Going to be waiting on either you or a gust of wind to brush off that gutter guard.

With those cons in mind, however, does come the advantage that they are one of the most affordable types of gutter guards. Now, they do make plastic gutter screens, but we don’t recommend that.

Simply because usually they’re gonna break and give you problems before you get any real benefit out of them.

That’s why we recommend installing either aluminum or powder-coated steel gutter guards, depending on your needs.

2. Micro-mesh gutter guards

Micro-mesh gutter guards, or gutter mesh, as you’ll sometimes hear it called, is kind of like a gutter screen. However, instead of the small holes that you’ll get with a gutter screen, micro-mesh is exactly what it sounds like.

Where it’s a tightly woven interlaced fabric mesh that will block a lot more debris than a gutter screen will.

They are a great choice for pine needles if you’re looking at what gutter guard needs to block pine needles. But they won’t block a lot of the very tiny debris, like small seedlings and little bits like that, that can still make their way into your gutters.

The primary con that you’ll see with gutter mesh is that when you install it, you have to screw it in, So it’s a lot harder to clean than gutter screens.

They’ll still block a lot more debris, So you won’t have to clean them nearly as often, but cleaning them will require a lot more handiwork, And in all likelihood, you’re probably gonna want that professionally done.

The main comparison between gutter mesh to gutter screens is that micro-mesh gutter guards are gonna be a lot harder to clean, But you’ll have to do it a lot less often compared to gutter screens.

3. Gutter helmet

Gutter helmets are a lot different than gutter screens and gutter mesh because they don’t rely on wind to knock off any debris, Any debris that rolls over on top of your gutter is just gonna roll right off because they cover the entire gutter.

The way that gutter helmets work, is that when water comes down, it relies on surface tension for it to wick back into your gutters while the debris still slides off the roof,  And that water goes into tiny little openings on the gutter helmet.

It’s not a perfect system though, and you’ll still see some water make it through and onto the ground. So we don’t recommend gutter helmets if you have a basement.

The other main cons of gutter helmets are that they’re the most expensive of the three options, And they’re hardest to clean.

When you do get your gutter helmets clean, which by the way, you will rarely ever have to clean your gutter helmet. But when you do, you’re going to need manufacturer’s people to come out there and do the cleaning for you.

Because if anybody outside of the manufacturer’s domain touches your gutter helmet, it voids the manufacturer’s warranty on them, and you don’t want that.

Also, unlike gutter mesh and gutter screens, gutter helmets will be a little less low-profile and can be seen from the street view. So you may have to take aesthetics in mind when purchasing your gutter helmet.

Those are our opinions on the top three best gutter guards, as well as their strengths and weaknesses.

Hopefully, now you’re armed with the knowledge you need to make the best decision for your home.

What are the advantages of using a leaf guard gutter?

Are excited to go out with a ladder and bucket and some gloves to clean your gutters?  for most people, the answer to this question is defiant no.

1. Gutter guards keep leaves, twigs, nests, and debris from accumulating on your gutters, requiring you to clean them much less often.

2. not only gutter guard keep your gutters cleaner for longer, but if you don’t have to clean your gutters you also won’t accidentally fall off from the ladder and the bed in the emergency room.

3. On top of protecting your safety, gutter guards reduce the risk of roof damage from clock gutters, and make sure water flows  from your foundation during a big storm, but people don’t choose the gutter guard for the practical benefits, they give your home a well maintained and pelling look and can add value

4. Gutter guard helps to prevent gutter channels from rusting before time.

5. Protects your roofs from water leakages, and also prevents water from freezing

6. paying someone to clean the gutter yearly can get costly too and those costs keep going up each year in addition to this expense if the people you hire to clean your gutters aren’t properly insured you’re liable for any injuries they sustain while working on your property

7. the guard gutter protection system gives you peace of mind because it stays clog-free and it’s engineered for quick installation

8. Efficient Gutters Keep Erosion on

9. Efficient Gutters Keep Your Home Foundations Strong

10. utters Properly Installed will Protect Your Siding

What are the disadvantages of gutter guards?

The disadvantage of gutter guards is they can allow dirt, sand, and leaves to pass through and clog your gutter or drain.

Depending on the style, they can be difficult to remove or get around for cleaning the gutter. Certain styles could even cause water to back up under your shingles and rot the roof sheathing at the eave.

Final thoughts

Our guide we’ll help you to choose the best leaf guard gutter for your home roof to keep debris, leaves, and birds out of your Gutters…

We have to search for weeks and weeks and test different leaf guard gutters to provide a list of gutter guards to choose the best one for you.

There is a bunch of leaf guard gutter on the market but to choose the best one you might consider material, price, durability…

We have found the best leaf guard gutter for those who looking for high-quality material, that is long-lasting, easy to install, and cost-effective is Stainless Steel Micro-Mesh, and Raptor Gutter Guard, all products on our list are good to go with…

we recommend you check the consideration and types below before buying a leaf guard gutter.

FAQs

What is the average cost for Leaf Guard?

They can be. Expect to pay from $5–30 per linear ft for having them installed. Most of the big-name companies are very “salesy” and charge a lot for them. However, if you can find a small local company to do it for the $8–12 per ft range.

I would say that’s a fair price (from the business owner’s side). Also, many people die/get injured each year cleaning gutters, so you have to consider that.

Can a leaf guard gutter be installed on existing gutters?

Yes but I find one particular drawback with these leaf filters. With existing gutters, the first row of the roof shingle lays partially over the back of the gutter and into the gutter.

This helps guide roof water into the gutter and helps protect the top rear edge of the gutter where it attaches to the house fascia board. When leaf filters are installed, this row of shingles must be trimmed back so the filter can be attached to the top back of the gutter

thus exposing this sensitive spot in my mind to the elements. Perhaps the leaf filter folks have an answer for this but for now, I’m going to leave my fairly new gutters alone.

Which type of gutter material is best?

The vast majority of people (90% or more) barely notice their gutters as long as they are functioning properly. They will choose based on price and convenience. This means seamless aluminum. Given this, up in the snow belt, it should be .032 thickness and down south .027 is fine.

How often does the guard gutter need to be replaced?

The only time gutters need to be replaced is if they’re corroded, broken, or undersized, or if you’re doing a remodel/addition.

The one exception is internal (California) gutters which use a membrane as the water raceway, instead of an external, K-type gutter, commonly seen on houses. The whole reason for internal gutters is aesthetics, but it comes at a terrible price.

How do we install the guard gutter by ourselves?

I carefully measure them and put a marker in the roof at the center point, I then make up my gutter and when finished proceed to hang it. I can hang a .027-thickness gutter up to 70 feet by myself using screw-in-type hangers.

Read also:

• List Of Top 12 Best Watermelon Cutter & Slicer Tool On The Market