How to remove Samsung refrigerator doors

Are you wondering how to remove Samsung refrigerator doors? Are your refrigerator doors broken or damaged and you want to remove them and replace them with others and you don’t know how?

Is your door handles broken and do you want to remove them to change them? And you don’t know? you’re in the right place where we’ll talk about these things.

Many people may have a problem with their refrigerator especially doors and door handles so in this article we’ll show how to remove Samsung refrigerator doors and how to remove Samsung refrigerator door handles?

So please read and follow these instructions and steps below:

how to remove samsung refrigerator doors

Tools you need:

  • Philips screwdriver.
  • 8020 torque or 5ml allen key, a 10 mil socket, a mil socket, a quarter mil socket
  • Drill
  • Tape
  • Allen wrench

before you start:

  • unplug or disconnect power
  • turn off the water supply to the refrigerator.

How to remove samsung refrigerator doors

step1.  remove the tabletop cover which is located at the top of the refrigerator.

To remove the tabletop cover:

  1. use a drill and remove three Philips screws at tabletop cover.

Step2. locate the four locking tabs indicated by the arrows.

  1. pry on the tabs
  2. flip up the cover.

Be careful, as it’s still connected by wires.

How to remove Samsung refrigerator left door?

  1. Disconnect the electrical plug by depressing the locking tab.
  2. remove the water line from the coupler by pushing the collar in and pulling the water line out.
  3. use a piece of tape to secure the door in place.
  4.  remove the hinge fixer by rotating it up and sliding it out.
  5. remove the coupler from the door hinge by carefully prying it out of the bracket.
  6. remove the door hinge by lifting up on the front, carefully removing the wires and water line and lifting out to remove.
  7. grab the handle.
  8. peel the tape back and support the other side of the door.
  9. open the door up about halfway and lift up to remove it from the hinge.

How to remove Samsung refrigerator right door?

  1. Use a piece of tape to secure the door in place.
  2. remove the hinge fixer by rotating it up and sliding it out.
  3. remove the the hinge by lifting up on the front of it and pulling it out.
  4. grab the handle.
  5. peel the tape back and support the other side of the door.
  6. open the door up about halfwayand lift up to remove it from the hinge.

How to remove freezer door from samsung refrigerator

  1. open up the freezer drawer.
  2. remove the upper freezer tray assembly by pushing it to the rear, lifting the wheels out of the slots, and then lifting up on the front to remove it.
  3. remove the freezer box tray by tilting the rear and pushing back to remove it from the front slot Then,tilt forward and lift up to remove..
  4. remove the four 10 mm bolts by using a drill, There are two on each side.
  5. remove the freezer door by grabbing both sides, lifting up to remove the door brackets from the slide rails and lifting out to remove.

How to remove samsung refrigerator door handles?

To do the job you will only need one tool either an Allen bit or an Allen wrench.

  1.  open up the door.
  2. Use your drill remove the allen set screw.
  3. pull the handle back and then lift up to remove.

While you’ve got the handle removed check the door handle mounting screw to make sure it is not loose.

If it’s losing you can tighten it with a Phillips screwdriver.

While you’ve got the handle off you’ll want to make sure that you look at these two pieces on the end of the handle.

And check those plastic pieces to make sure that there’s nothing broken on the end caps of the handle.

How to remove Samsung freezer door handles?

to take off the freezer door handle:

1. use a 3/32 Allen wrench to loosen up the set screw.

2. once you have the set screw loose pull the handle of the mounting pin and then we have to slide it to the right the other end releases.

3. once you have it free pull it off the door.

 if you try to take your handle off and the left side won’t unlock you may have the style that’s locked on there so

you may have to:

4. open up the freezer door and we have to lift up on the handle get an angle back towards the refrigerator and lift it off.

5. Once you have the freezer door handle off you can pull it off the refrigerator.

How to reinstall samsung freezer door?

To reinstall the freezer door:

  1. aligning the tabs on the door brackets with the slots on the freezer glides and setting in place.
  2. By using drill reinstall the four 10 mm bolts.
  3. reinstall the freezer box tray by inserting the back first, tilting the front forward into the slot,and then setting it in place.
  4. reinstall the upper freezer tray by tilting in the rear and setting it down onto the freezer box tray.
  5. push the freezer box tray to  the rear and then pull it forward to make sure the wheels are locked in place.

How to reinstall Samsung refrigerator right door?

1. align the hole on the bottom with the pin on the hinge and set it in place.

2. close the door and reapply the tape to secure it in place.

To install the hinge:

3. insert the back into the slot.

4. align the door with the hinge and push it down.

To install the hinge fixer:

5. insert it into the bracket and push it down until it locks into place.

6. remove the tape.

How to reinstall Samsung refrigerator left door?

1. align the hole on the bottom with the pin on the hinge and set it in place.

2. close the door and reapply the tape to secure it in place.

To install the hinge:

3. Insert the waterline and wires through the slot and hinge.

4. insert the rear of the hinge into the slot on the refrigerator.

5. align the door with the hinge and push the hinge down.

6. install the coupler back into the hinge by aligning it into the slot and pushing it down.

To install the hinge fixer:

7. insert it into the bracket and push it down until it locks into place.

8. remove the tape.

To install the waterline:

9. install the waterline by inserting it into the coupler until it bottoms out.

10. pull on it slightly to make sure that it’s secured in place.

11. reconnect the electrical plug and make sure that the rubber is sealed properly.

12. flip the tabletop cover down and push on the four tabs until they lock into place.

13. By using your drill reinstall the three Philips screws.

With everything put back together, plug the refrigerator back in and turn the water supply back on to the refrigerator. Test everything out to make sure that it’s working properly and make sure that there’s not any water leak.

How to reinstall Samsung refrigerator door handles?

make sure the door handle screw on the door goes into this larger opening and then we’ll slide the handle down so it locks into place. Once the bottom of the handle is placed:

1. pull the top of the handle outward and push it onto the door handle screw.

2. Push the top of the handle so it’s flush with the door of the fridge, then install the set screw.

Read also:

Elhoucine

My Name is Elhoucine I am a passionate blogger, I have been searching and reading about the newly released gadgets, appliances, and products, and through this blog, I am trying to share some of the acquired experience to help you with everything related to home.