How To Clean Dyson Air purifier Filter Step-By-Step

Is this the first time you’re trying to clean Dyson air purifier filter? And you find it difficult or you don’t have any idea where to start? Is your Dyson air purifier not cooling good doesn’t make fresh air anymore?  Then maybe your air purifier is dirt and the filter is filled with debris and dirt?

To always get the best performance from your Dyson purifying humidifying fan, it is important to carry out regular deep cleaning to remove any limescale.

Your machine will alert you when it needs you to carry out a Deep clean cycle. If you are connected to the Dyson Link app, you will receive a notification message.

If you are not using the Dyson Link app, the LCD screen on your machine will alert you and the Deep clean cycle button will light up.

IMPORTANT: don’t turn off or unplug your machine as the cleaning instructions will appear on the LCD screen

Cleaning the HEPA air purifier filter will save your air purifier for a lifetime and keep and enjoy the fresh air in your home.

After being done with a bunch of experience and searching to find the best way to clean Dyson air purifier filter, we provide you this guide on how to clean Dyson air purifier filter step-by-step follow these instructions and steps, and don’t pass any step.

Without further a do let’s jump in!

how to clean dyson air purifier filter

How to clean Dyson air purifier filter (Dyson pure humidify+cool) Step-By-Step

Deep cleaning your machine

To always get the best performance from your Dyson purifying humidifying fan, it is important to carry out regular deep cleaning to remove any limescale.

Before and after long periods where humidification is not used, it is recommended that additional Deep clean cycles are run.

In hard water areas, you may need to run the Deep clean cycle more frequently. Your machine will alert you when it needs you to carry out a Deep clean cycle.

If you are connected to the Dyson Link app, you will receive a notification message.

If you are not using the Dyson Link app, the LCD screen on your machine will alert you and the Deep clean cycle button will light up.

To cancel the Deep clean cycle at any point, press and hold the Deep clean cycle button for five seconds.

Step1. Press the Deep clean cycle button on the front of your machine and your instructions will be shown on the LCD screen.

To clean Dyson air purifier filter:

Step2. Push down on the shroud release buttons to remove the shrouds. The inner door will spring open.

Step3. Put the shrouds to one side as you carry out the Deep clean cycle.

Step4. Push down the water tank release buttons on the sides of your machine.

Step5. Slide the water tank out of your machine and unclip the cap.

Step6. Remove the evaporator from your machine, place it in the water tank and refit the cap.

Step7. Carry the water tank by its handle to the tap.

Step8. Remove the cap and evaporator. Fill the water tank halfway to the Max level with cold tap water.

Step9. Measure out 150g of citric acid and place it in the water tank.

Step10. Agitate gently until all the citric acid has dissolved.

Step11. Place the evaporator in the water tank.

Step12. Fill the water tank to the Max level with cold tap water.

Step13. Replace the cap and secure the cap clips in place.

Step14. Wipe off any excess water to avoid drips.

Step15. Slide the water tank into your machine until it clicks securely in place.

Step16. When prompted by the LCD screen, press the Deep clean cycle button. The Deep clean cycle will start and the LCD screen will show a countdown timer.

Step17. When the LCD screen shows the Deep clean cycle is complete, push down the water tank release buttons on the sides of your machine.

Step18. Slide the water tank out of your machine. Carry the water tank by its handle to the tap.

Step19. Unclip the cap, take the evaporator out of the water tank and rinse under a cold tap.

Step20. Wipe away any excess water to avoid drips and place the evaporator to one side.

Step21. Rinse the water tank under a cold tap.

Step22. Wipe the inside of the tank to remove any excess solution and any debris.

Step23. Refill the water tank to the Max level and wipe off any excess water and replace the cap, making sure that the cap clips are secured.

Step24. Push the evaporator back into your machine, making sure that it is securely in position.

Step25. Close the inner door and replace the shrouds.

Step26. Slide the water tank back into your machine and make sure it is securely in place.

How to clean Dyson air purifier filter (Dyson pure cool)?

To ensure that your appliance works efficiently, it is important to clean and check for blockages regularly.

Note: Unplug your appliance from the mains electricity supply before cleaning.

Dust may accumulate on the surface of the machine.

Step1. Wipe dust from the loop amplifier, filter unit, and other parts with a dry or damp cloth.

Step2. Look for blockages in the air inlet holes on the filter and the small aperture inside the loop amplifier.

Step3. Use a soft brush to remove dust and debris.

  • Do not use detergents or polishes to clean the appliance.

How to clean Dyson air purifier filter (Dyson pure cool me ™)?

To always get the best performance from your Dyson personal purifying fan, it is important to regularly clean it and check for blockages.

Step1. Unplug your appliance from the mains electricity supply before cleaning.

Step2. Regular clean

1. Brush the outside of your machine with a soft brush to remove any debris from the mesh.

2. Use a soft, dry, lint-free cloth to clean the ball and dome.

Step3. Deep clean

1. When changing your filter, give your machine a thorough clean.

2. With the filter removed, use Dyson’s crevice tool (or long-handled, clean, paintbrush) to remove any debris from the base of the machine.

Can I wash my Dyson air purifier filter?

Most people assume that a HEPA filter can not be cleaned and must be thrown away once or twice a year.

We’ll show you that it is quite easy to wash these filters over and over again to save you a lot of money.

This does not damage or change the integrity of the filter in any way and you will notice “like new” airflow after you’ve cleaned your filters.

Step1. Remove the HEPA filter

1. push down on the buttons on either side of your machine to release the outer cover

2. Push down on the tabs to remove the filter.

Step2. Fill sink or bucket or container with hot water.

Step3.

1. As the sink is filling up we’ll add a small amount of laundry detergent to it it can be a dry or liquid laundry detergent doesn’t matter.

2. Make sure it’s all dissolved and mixed with the water.

Note: if you have very sensitive hands you may want to wear gloves while doing this

Step4. once the sink is full will immerse the dirty filter into this solution.

Step5. begin to kind of agitate it and kind of wash the fluid through the filter, letting it flow through the filter.

you’ll probably be a little disgusted and surprised just how much debris and junk the filter has collected over the months.

Remember you’re dealing with wet paper here so resist the urge to blast this thing with a strong water nozzle it will mess up the paper.

Step6. let it soak for about 15 minutes in this solution.

if you want to soak it for longer then that’s fine.

Step7. drain off all that dander and pollen and Coronas right down the drain.

Step8. Rinse the HEPA filter out

1. again filling the sink with hot water pretty Much do the same thing we did when we had it in the soap solution just kind of agitated and let the water flow through the filter

As an option, if you want to make sure that the filter is sterile you can add some bleach to it without destroying the media.

Step9. Dry the filter out.

the emphasis here is to avoid damaging the wet filter medium on the paper.

1. Set the wet filter on top of a folded-up terry cloth towel.

The water will be whipped out of the filter into the towel, this is effective and it only takes about 30 minutes to get to the point for the next step.

and again we want to protect that delicate paper but you don’t want to bless it with a stream of air or damage it with a heat gun or a hairdryer just let it do its thing it’ll work.

After 30 minutes the filter will be dry.

Step10. Reinstall the HEPA filter.

1. Push the replacement filter into the outer cover and make sure the tabs click into place.

2. Put the outer covers into position on your machine and push firmly until they both click securely into position.

How often should I clean or change Dyson air purifier filter?

According to the frequency of use, the replacement time also varies, basically 3-6 months to replace once, the northern summer almost will not open, so the time can be properly extended. However, the machine has an automatic detection system to detect the use of the filter to indicate whether it needs to be replaced, and there will be lights to remind when the filter needs to be replaced.

In the air purifier, there is an allergen filter, the role of this filter is to filter out the air pollen and animal hair or other allergens, the cleaning method is: once a month, this filter can not be rinsed directly with water, only with something to pat dust.

The HEPA filter in the air purifier filter is the best filter material, because of its adsorption capacity, and high purification efficiency, if used to filter cigarettes, the effect can reach 100%, so the filter effect of this filter is not ordinary.

Cleaning method: this filter can not be washed, and activated carbon, as well, according to the home use environment purifier warning light to remind direct replacement, it is recommended that every six months need to be replaced once, to ensure the quality of air.

The filter in use is full of dust and has to be replaced, to ensure that the air purifier filter can be in the best condition to ensure healthy and clean air. Because once the filter is saturated, it will no longer adsorb dust bodies, and the air passing through the purifier will not only not be purified, but will also form secondary pollution due to the pollutants adsorbed on the filter.

How to reset HEPA and carbon filter in Dyson air purifier filter?

It’s important to reset your filter life after you have replaced your filter.

 Resetting your HEPA filter life:

 1. Press and hold the Night mode button on your remote control.

The display on your machine will count down from five, the filter life will be reset and your machine is ready to use.

Resetting your carbon filter life:

1.  Press and hold the Oscillation button on your remote control.

The display on your machine will count down from five, the filter life will be reset and your machine is ready to use.

What happens if you don’t change Or clean the filter on Dyson air purifier?

When you don’t clean or replace the filters on an air purifier, the air quality in your home gets worse, the electricity costs of running your air purifier increase, the air in your home becomes stale and stagnant, and your air purifier becomes a breeding ground for germs and mold and you might be stressing the fan motor

Most air purifiers have filters that need to be cleaned or changed occasionally. I was wondering if there are any side effects of not changing the filters as specified by the manufacturer.

As I did my research, I found that are multiple things that will happen when the filters on an air purifier. Spoiler alert: None of these things are good. It is, therefore, a very good idea to change your air purifier’s filter as specified.

Read also:

Final thoughts

This guide on how to clean Dyson air purifier filter will help you to clean your air purifier the right way and will save your air purifier for a lifetime and keep and enjoy the fresh air in your home

The filter of an air purifier is one of the most important components that are responsible for cleaning the polluted air in your home. All the pollutants got stuck in the air filter and you get fresh and purified air.

Not cleaning or changing the filter will impact the performance of the air purifier. It will not be able to purify the air in your home or I can say it will make it worse. Also, the filter will become home to harmful microorganisms that will impact your health.

So, don’t take the risk and make sure to change the air purifier’s filters on time.

Elhoucine

My Name is Elhoucine I am a passionate blogger, I have been searching and reading about the newly released gadgets, appliances, and products, and through this blog, I am trying to share some of the acquired experience to help you with everything related to home.