How To Clean Homedics Air Purifier Filter Step-By-Step

Is this the first time you’re trying to clean homedics air purifier filter? And you find it difficult to clean it? You’re in the right place after having done a bunch of searches and experiences we’ll show you the right way to clean homedics air purifier.

the term HEPA stands for “High-Efficiency Particulate Air”, and what that means is it’s a special type of filter that captures microscopic particles. Those particles include things like dust, pollen, mold spores, pet dander, bacteria, smoke, and particulate matter that comes from outdoor air pollution.

So cleaning the HEPA air purifier filter will save your air purifier for a lifetime and keep and enjoy the fresh air in your home.

So in this article, we’ll show you how to clean homedics air purifier filter step-by-step, so please follow the steps and instructions below:

Clean Homedics Air Purifier Filter

How to clean homedics air purifier filter step-by-step

NOTE: For best performance, vacuum the pre-filter once a month under normal usage.

Step1. Unplug the air purifier.

Step2. Remove the True HEPA filter as described below:

To remove and replace HEPA filter in homedics air purifier:

1. Unplug the air purifier.

2. Pull the indents on each side of the grille cover.

3. Remove the grille cover and set it aside.

4. Pull the tabs to remove the old filter.

5. With the filter tabs facing outward, insert the new True HEPA filter.

6. Place the tabs at the bottom of the grille cover into the base of the air purifier.

7. Gently push the grille cover until it snaps into place.

8. Plug the power cord into a standard AC outlet.

9. Turn the air purifier on.

10. Press and hold the ionizer button for 3 seconds to reset the indicator.

Step3. Vacuum the outside of the True HEPA filter using the brush attachment of your vacuum cleaner, cleaning it thoroughly.

Step4. Place the True HEPA filter back into the air purifier and close the grille.

Step5. Plug the power cord into a household electrical outlet.

For best performance:

• NEVER use water or any household cleaners or detergents to clean the True HEPA filter.

• Clean off the outside of the unit with a soft, dry cloth as needed.

• NEVER use water, wax, polish, or any chemical solution to clean the outside of the unit.

• Clean off the grille cover using a damp cloth or the brush attachment of your vacuum as needed.

• Vacuum the pre-filter monthly under normal usage conditions.

• Replace the True HEPA filter every 12 months under normal usage conditions.

• Always use a genuine HoMedics replacement filter for optimal performance.

How to clean homedics AF-10 air purifier filter step-by-step

Note: make sure that the air cleaner is turned off and unplugged from the outlet before cleaning.

Step1. Open the front grill cover by gently pulling on the tabs on either side of the top of the grill cover.

Step2. Open the grill cover outward until the tabs at the bottom of the grill cover easily slide away from the unit.

Step3. Remove the true HEPA filter from the main unit.

Step4. Use the brush attachment with your vacuum cleaner.

Step5. Run the attachment along both sides of the true HEPA filter, cleaning thoroughly between the accordion fold of the filter.

Step6. Place the clean true HEPA filter back in the main unit, making sure it is firmly seated inside the unit.

Step7. Place the tabs at the bottom of the grill cover into the base of the unit.

Step8. Gently push the grill cover back into place until you hear a click sound indicating that the grill cover is firmly latched.

How to clean homedics professional Hepa AR 10 air purifier filter step-by-step

Make sure that the air cleaner is turned OFF and unplugged from the outlet before cleaning.

Step1. Open the front grill by gently pulling on the tabs on either side of the top of the grill plate.

Step2. Open the plate outward until the tabs at the bottom of the grill plate easily slide away from the unit.

Step3. Remove the HEPA filter from the main unit.

Step4. Use the brush attachment with your vacuum cleaner.

Step5. Run the attachment along both sides of the HEPA filter, cleaning thoroughly between the accordion folds of the filter.

Step6. Place the clean HEPA filter back in the main unit, making sure that it is firmly seated inside the unit.

Step7. Place the tabs at the bottom of the grill plate into the base of the unit.

Step8. Gently push the grill plate back into place until you hear a click sound indicating that the grill is firmly latched.

Can I wash my HoMedics air purifier filter?

Most people assume that a HEPA filter can not be cleaned and must be thrown away once or twice a year.

We’ll show you that it is quite easy to wash these filters over and over again to save you a lot of money.

This does not damage or change the integrity of the filter in any way and you will notice “like new” airflow after you’ve cleaned your filters.

Step1. Remove the HEPA filter

1. Unplug the air purifier and turn it upside down. Turn the filter cover as indicated to remove.

2. Remove the filter cover and set it aside.

3. Pull to remove the HEPA filter.

Step2. Fill sink or bucket or container with hot water.

Step3.

1. As the sink is filling up we’ll add a small amount of laundry detergent to it it can be a dry or liquid laundry detergent doesn’t matter.

2. Make sure it’s all dissolved and mixed with the water.

Note: if you have very sensitive hands you may want to wear gloves while doing this

Step4. once the sink is full will immerse the dirty filter into this solution.

Step5. begin to kind of agitate it and kind of wash the fluid through the filter, letting it flow through the filter.

you’ll probably be a little disgusted and surprised just how much debris and junk the filter has collected over the months.

Remember you’re dealing with wet paper here so resist the urge to blast this thing with a strong water nozzle it will mess up the paper.

Step6. let it soak for about 15 minutes in this solution.

if you want to soak it for longer then that’s fine.

Step7. drain off all that dander and pollen and Coronas right down the drain.

Step8. Rinse the HEPA filter out

1. again filling the sink with hot water pretty Much do the same thing we did when we had it in the soap solution just kind of agitated and let the water flow through the filter

As an option, if you want to make sure that the filter is sterile you can add some bleach to it without destroying the media.

Step9. Dry the filter out.

the emphasis here is to avoid damaging the wet filter medium on the paper.

1. Set the wet filter on top of a folded-up terry cloth towel.

The water will be whipped out of the filter into the towel, this is effective and it only takes about 30 minutes to get to the point for the next step.

and again we want to protect that delicate paper but you don’t want to bless it with a stream of air or damage it with a heat gun or a hairdryer just let it do its thing it’ll work.

After 30 minutes the filter will be dry.

Step10. Reinstall the HEPA filter.

1. Slide the HEPA-type filter into the filter cavity.

2. Reinstall the filter cover and turn to the right to lock it in place.

How often should I clean or change homedics air purifier filter?

According to the frequency of use, the replacement time also varies, basically 3-6 months to replace once, the northern summer almost will not open, so the time can be properly extended. However, the machine has an automatic detection system to detect the use of the filter to indicate whether it needs to be replaced, and there will be lights to remind when the filter needs to be replaced.

In the air purifier, there is an allergen filter, the role of this filter is to filter out the air pollen and animal hair or other allergens, the cleaning method is: once a month, this filter can not be rinsed directly with water, only with something to pat dust.

The HEPA filter in the air purifier filter is the best filter material, because of its adsorption capacity, and high purification efficiency, if used to filter cigarettes, the effect can reach 100%, so the filter effect of this filter is not ordinary.

Cleaning method: this filter can not be washed, and activated carbon, as well, according to the home use environment purifier warning light to remind direct replacement, it is recommended that every six months need to be replaced once, to ensure the quality of air.

The filter in use is full of dust and has to be replaced, to ensure that the air purifier filter can be in the best condition to ensure healthy and clean air. Because once the filter is saturated, it will no longer adsorb dust bodies, and the air passing through the purifier will not only not be purified, but will also form secondary pollution due to the pollutants adsorbed on the filter.

How to reset clean filter on homedics air purifier?

The air cleaner is equipped with a CLEAN FILTER indicator to let the user know when it is time to clean the HEPA filter, about every 2,800 hours of use. When the HEPA filter is ready to be cleaned, the LED CLEAN FILTER indicator will light up on the control panel.

Once the HEPA filter has been cleaned:

1. Press and hold the CLEAN FILTER button to reset the Indicator until the LED indicator light flashes and turns off.

What happens if you don’t change Or clean the filter on an air purifier?

When you don’t clean or replace the filters on an air purifier, the air quality in your home gets worse, the electricity costs of running your air purifier increase, the air in your home becomes stale and stagnant, and your air purifier becomes a breeding ground for germs and mold and you might be stressing the fan motor

Most air purifiers have filters that need to be cleaned or changed occasionally. I was wondering if there are any side effects of not changing the filters as specified by the manufacturer.

As I did my research, I found that are multiple things that will happen when the filters on an air purifier. Spoiler alert: None of these things are good. It is, therefore, a very good idea to change your air purifiers filter as specified

Is it bad to use an air purifier with an old filter?

As your purifier has to work harder to pass air through, it will become less energy efficient.

If you leave an old filter in too long, it can markedly increase your air purifier’s energy consumption.

Wait too long, and you’ll be stuck with higher energy bills and lower air quality.

Read also:

Final thoughts

The filter of an air purifier is one of the most important components that are responsible for cleaning the polluted air in your home. All the pollutants got stuck in the air filter and you get fresh and purified air.

Not cleaning or changing the filter will impact the performance of the air purifier. It will not be able to purify the air in your home or I can say it will make it worse. Also, the HEPA filter will become home to harmful microorganisms that will impact your health.

So, don’t take the risk and make sure to change the air purifier’s filters on time.

Elhoucine

My Name is Elhoucine I am a passionate blogger, I have been searching and reading about the newly released gadgets, appliances, and products, and through this blog, I am trying to share some of the acquired experience to help you with everything related to home.