How To Use Ambiano Cold Brew Coffee Maker

Is this the first time you’re trying to use ambiano cold brew coffee maker? And you find it difficult to use it? Are you trying t make a cold brew coffee and you don’t know how? You’re in the right place where we’ll show you how to use ambiano cold brew coffee maker.

Cold Brew is a delightful and smooth coffee. It’s great served cold, over ice, or hot. Since it’s cold and smooth and low-acid, you can add an almost unlimited number of flavors to it.

With ambiano cold brew coffee maker, you can make a cold brew coffee with multi flavors and is easy to use.

So please follow the steps and instructions below:

How To Use Ambiano Cold Brew Coffee Maker

How to use ambiano cold brew coffee maker?

Step1. Put the nozzle into the thread in the pot one and turn the Nozzle clockwise to lock.

Note: When filling in the water, make sure that the water level is always between MIN and MAX on the level indicator on the jug must.

Step2. Fill the jug with cold water or water at room temperature and place the jug in the appliance base.

Step3. Put the coffee filter Now fill up to the maximum 60 g coffee powder in the coffee filter.

Step4. Place the filter cover on the coffee filter.

Step5. Close the jug with the jug lid and lock it in by turning it clockwise.

Step6. When you have fully assembled the product, close it with the plug-in power adapter to the power grid.

Step7. Press the TIME button on the LED display.

Step8. to set the duration for the coffee:

  • brew for 10, 20, 30, or 40 minutes.

Step9. Press the START/STOP button on the LED display to stop the brewing process start or to interrupt it.

The display shows a countdown while the coffee is being prepared. starts flashing when the countdown has reached zero and the coffee is ready.

How much coffee do you put in ambiano cold brew?

The sort practice to get the taste you want of the coffee, the roasting, the degree of grinding, the water hardness, quantity, temperature, like throughput time – all of which have an impact on the result.

For starters, start with about 20g of medium to coarsely ground coffee, 450ml fresh tap water, and 10 minutes throughput time.

Taste the coffee after the time is up.

If you don’t like it, leave the coffee for another 10 minutes go through it or repeat the process as often as you like.

Classically complete the finished coffee with milk and ice cubes or try vanilla ice cream, tonic water, lemon juice, or coconut milk– vary the ingredients and find your favorite.

How to clean ambiano cold brew coffee maker

Step1. Unplug the power adapter before cleaning.

Step2. Wipe the device base with a slightly damp cloth. Then dry it completely.

Step3. Rinse the removable parts such as jug, Jet, coffee filter and filter cover Then leave dry all parts completely.

How to use ambiano single-serve coffee maker?

Before the first use or after a long period of non-use When using the coffee maker for the first time, it is recommended to operate it for 2-3 full cycles without the filter or pod holder.

To use ambiano single-serve coffee maker:

Step1. Fill the water tank to the MAX line. Then plug the coffee maker into the wall outlet.

Step2. Lift the release lever, take out the brew basket and remove the pod holder

and the filter and replace the brew basket.

Step3. Be sure the release lever is pushed down and press the power to ON and the power button will turn green.

If the lever is not locked into place, the power button will be red.

Step4. The 8oz and the 15oz button will light up while the power button flashes. This means the water is heating up.

Step5. When all 3 buttons are lit, (30-60 seconds) and the power button is solid green, the coffee maker is ready to brew.

Step6. Place a suitable cup/mug on the cup rest large enough to brew 8oz to 15oz. The ounces button will flash until the brew is complete (about 1-2 minutes).

Step7. Continue brewing the water only, until the tank has emptied.

Step8. Make sure to wait about 2-3 minutes in between brews so the coffee maker

can cool.

Note: The coffee maker may produce an odor and emit smoke when switched on for the first time, as residues from the production process are eliminated. This is normal and does not indicate a defect or hazard.

How to brew a single-serve cup of coffee in ambiano coffee maker?

1. Lift the release lever, take out the brew basket and remove the pod holder and the filter.

2. Place a Single Serve Cup into the pod holder and press down to make sure a hole is punched in the bottom.

3. Place the pod holder into the brew basket (without filter), making a sure hole in the pod holder that lines up with the brew basket.

4. Push the brew basket into the coffee maker and press down on the release lever to lock the brew basket into place.

5. Fill the water tank and plug it into a wall outlet.

6. The 8oz and the 15oz button will light up while the power button flashes. This means the water is heating up.

7. When all 3 buttons are lit, (30-60 seconds) and the power button is green, the coffee maker is ready to brew.

8. Place a suitable cup/mug on the cup rest large enough to brew 8oz to 15oz.

9. Choose 8oz or 15oz brew size.

How to brew ground coffee in ambiano coffee maker?

1. Lift the release lever, take out the brew basket and remove the pod holder and the filter.

2. Place the desired amount of coffee grounds into the reusable filter.

3. Place the filter with coffee grounds into the brew basket.

4. Push the brew basket into the coffee maker and press down on the release lever to lock the brew basket into place.

5. Fill the water tank and plug it into the wall outlet.

6. The 8oz and the 15oz button will light up while the power button flashes. This means the water is heating up.

7. When all 3 buttons are lit, (30-60 seconds) and the power button is green, the coffee maker is ready to brew.

8. Place a suitable cup/mug on the cup rest large enough to brew 8oz to 15oz.

9. Choose 8oz or 15oz brew size.

Note: After brewing, allow 2-3 minutes to cool in-between brews.

How to use ambiano 12-cup programmable coffee maker?

Step1. Lift the lid and fill the water tank with the desired quantity of cold water.

  • You can see markers for the number of cups on the external water level indicator.
  • Always fill the tank to at least the lowest marker.

Step2. Place the filter in the filter holder.

Make sure that the filter holder and the filters are inserted correctly, otherwise, the lid will not close properly later.

Step3. Now fill with ground coffee.

We recommend per cup a heaped teaspoon (approx. 6g) of medium or finely ground coffee.

Notes:

  • The filter holder is fitted with a non-drip device (valve), which prevents dripping once the glass coffee jug has been removed.
  • When you place the glass coffee jug on the hotplate, the filter valve is pushed upwards.
  • The filter outlet opens and the fresh coffee runs through the opening in the lid into the glass coffee jug. This ensures that the coffee can brew when the lid is closed.
  • Once the coffee is made and you would like to keep the jug warm, leave the glass jug on the hotplate. The coffee will now stay warm.
  • When the appliance switches itself off 2 hours after the start of the brewing process or you switch it off manually, the hotplate will no longer stay warm.
  • Your Coffee Maker has a timer function, which allows you to set when you want the appliance to automatically start the brewing process.
  • But you can still use the device without setting the clock or timer function beforehand.

How to make coffee without the timer function in ambiano coffee maker?

1. Attach the appliance to a correctly installed electrical socket. The display will showAM12:00.

2. To start the brewing process, press the ON/OFF button 11 once.

The brewing process begins and the operating indicator light (RUN) 15 comes on.

3. You can interrupt the brewing process at any time by pressing the ON/ OFF button 11 twice.

When you press it for the first time, the appliance goes into timer mode and the AUTO indicator light 16 will show.

4. To restart the brewing process, press the ON/OFF button 11 again.

The operating indicator light 15 will come on again.

Before removing the glass coffee jug 2 always wait until the brewing process has ended and the filter has emptied. The appliance switches off automatically approx 2 hours after the start of the brewing process.

How to make coffee using the timer function in ambiano coffee maker?

1. Attach the appliance to a correctly installed electrical socket. The display will show AM12:00.

2. Press the PROG button once, the word CLOCK appears in the upper right-hand corner of the display.

3. By pressing the HOUR button and the MIN button you can now set the time.

Note: Keep the buttons pressed for a faster operation.

4. To set the timer so that the brewing process begins at the required time, press the PROG button again. The word TIMER appears in the upper left-hand corner of the display.

5. You can set the start time for the brewing process by pressing the HOUR button and the MIN button.

6. Now press the ON/OFF button twice.

The AUTO indicator light will come on to show that the appliance is in timer mode.

7. After a few seconds the display will show the current time. You can always check on the time set for the start of the automatic brewing process by pressing the PROG button (and also change it if you wish to).

8. If you would like to switch off timer mode, press the ON/OFF button.

When the automatic start time is reached, the AUTO indicator light will go out and the operating indicator light will come on. This confirms that the brewing process has started.

If you wish to start again or if you open the lid, always wait until the appliance has switched itself off and has cooled down to room temperature.

Read also:

Elhoucine

My Name is Elhoucine I am a passionate blogger, I have been searching and reading about the newly released gadgets, appliances, and products, and through this blog, I am trying to share some of the acquired experience to help you with everything related to home.