How to Clean Coway Air Purifier like a Pro: Say Goodbye to Indoor Pollutants!

Is this the first time you’re trying to clean coway air purifier? And you find it difficult or you don’t have any idea where to start? Is your coway air purifier not cooling good doesn’t make fresh air anymore? Then maybe your air purifier is dirt and the filter is filled with debris and dirt?

Great air quality is fundamental for carrying on with a sound life, particularly since the vast majority spend by far most of their time inside.

In the characteristic world, air courses consistently as winds and changing climatic weight cause air to circle rapidly. Indoor situations, then again, need air to be falsely sifted to counter residue and different microorganisms that can develop in a shut inside space.

Albeit most air purifier channels are strikingly powerful for catching the particles noticeable all around, they can rapidly top off with caught air particles that can affect their capacity to perform.

Fortunately, most air purifier makers make cleaning channels basic, so proprietors of a spotless air purifier who set aside the effort to figure out how to clean their purifiers appropriately can appreciate excellent air for quite a long time to come.

After being done with a bunch of experience and searching to find the best way to clean coway air purifier, we provide you this guide to how to clean coway air purifier step-by-step follow these instructions and steps and don’t pass any step.

Without further a do let’s jump in!

Before starting cleaning:

Always unplug the power plug before cleaning.
Do not use organic solvents (thinner, etc.), bleach, or detergents containing chlorine or abrasives to clean the product.
Do not immerse the product in water or spray water on it.

How To Clean Coway Air Purifier AP-1520C?

1. Clean Pollution Sensor

Step1. Open the cover of the pollution sensor on the left side of the product. Clean the air inlet, air outlet, and pollution sensor with a soft brush or vacuum cleaner.

Step2. Soak a cotton swab in water and wipe off the lens, the dust inlet, and outlet, then wipe it off with a dry cotton swab to remove moisture from it.

The performance of pollution detection sensors may decrease if not cleaned regularly.
The cleaning cycle varies depending.

2. Air Inlet and Outlet

Please clean the air inlet and air outlet with a soft brush.

Take care that dust does not fall inside the purifier while cleaning.

3. Clean front cover

Remove the front cover from the purifier and then wipe away dust stuck to the surface with a soft, dry cloth or soft brush.

If there is severe contamination, use a damp cloth (do not use abrasives).

4. Clean Main Body of Product

Use a dry and soft cloth to wipe it.

If there is severe contamination, use a damp cloth (do not use abrasives).

5. Clean coway air purifier Pre-filter

Step1. Pull the top part of the front cover to open it.

Step2. Press the pre-filter knob and take the filter out.

Be careful that dust doesn’t fall out during removal.

Step3. Remove dust with a vacuum cleaner or water depending on the degree of pollution.

Step4. Dry the pre-filter completely and install it on the product.

Step5. Re-attach the front cover on the product.

When installing the pre-filter on the product, fix it correctly on the projection.

6. Clean coway air purifier RBD Plasma, photocatalyst filters

Step1. Pull the upper part of the front cover to open.

Step2. Take out the RBD Plasma, and photocatalyst filters, and then press both projections of the filter to separate the filter into two parts.

Step3. For the RBD Plasma filter, use a damp cloth to wipe off dirt from the silicon surface and tungsten wire, and then wipe dry with a dry cloth.

Never spray or immerse in water.
Handle the bottom of the tungsten wire carefully.
If water enters inside the filter, it must be dried completely. (If water enters inside, use it after drying for 12 hours or more.)
Wash the photocatalyst filter separately using a shower, and use it after it is completely dried.
If you use it in a wet condition, it can lead to an electric shock.

How To Clean Airmega Coway Air Purifier (Airmega Air Purifier 400S/400/300S/300)

1. Clean exterior

Wipe the exterior of the product with a soft dry cloth.

When the exterior is dirty, use a slightly damp cloth.

2. Clean Airmega coway air purifier Pre-filter

When the [Pre Wash] indicator is on, clean your pre-filters on both sides. Follow these instructions below to clean the filters.

Step1. Remove both sides of covers and pre-filters.

Press two tabs at the top of the pre-filters and pull them outward to remove them from the product.

Step2. Remove dust with a vacuum cleaner or water.

If vacuuming does not seem to sufficiently clean the pre-filters, gently wash them under the water.
If you use water to clean the pre-filter, dry the pre-filter in the shade before re-installing it.

Step3. Return both sides of pre-filters and covers.

Note: The product will not turn on if the right and left covers are installed incorrectly.

Step4. Touch and hold the [Pre Wash] button on the control panel to reset the filter indicator.

Note: After cleaning the pre-filters, you must reset the filter’s cleaning cycle using the [Pre Wash] button.

3. Clean Front, Right, and Left Covers

Clean the front, right, and left covers frequently for optimum performance. Follow these instructions below to clean the covers.

Step1. Remove the front, right, and left covers.

Lift and pull the upper part of the front cover to remove it.
Pull the upper part of the right and left covers to remove them.

Step2. Remove dust with a soft, dry cloth or brush.

Step3. Fit the cover to the grooves at the bottom of the product, and push the cover into place.

Note: The product will not turn on if the right and left covers are installed incorrectly.

4. Clean Air Outlet

Clean the air outlet frequently for optimum performance. Follow these instructions below to clean it.

Step1. Turn the air outlet cover counterclockwise and lift it.

Step2. Remove dust or any foreign objects from the air outlet.

Caution: Be careful not to allow any foreign objects and liquid to enter the air purifier.

Step3. Align the ● mark on the cover and the ○ mark on the main unit, and turn the cover to ● mark on the main unit.

You will hear a clicking sound when the cover is closed well.

Note:

Do not place anything on top of the product.
Be careful not to drop anything into the air outlet cover.

5. Clean Pollution Sensor

Clean the pollution sensor approximately every 2 months for optimum performance. Follow these instructions below to clean it.

Step1. Lift and pull the upper part of the front cover to remove it.

Step2. Hold the upper part of the pollution sensor cover and remove it.

Step3. Wipe the lens, dust inlet, and dust outlet with a dry cotton swab.

Step4. Push the pollution sensor cover until you hear it click into place.

Step5. Fit the front cover to the grooves at the bottom of the product, and push the front cover into place.

How To Clean Coway Air Purifier AP-1516D?

1. Cleaning the outlet and detachable outlet grille

Lift the detachable outlet grille on top of the outlet, then clean the grille and outlet with a soft brush or vacuum cleaner.

Be careful not to let dust enter the outlet while cleaning.
When reassembling the upper detachable outlet grille, put the grille tabs into the purifier slots as in the picture on the right.

2. Cleaning the detachable front grille

Turn the front grille counterclockwise while removing it. Clean the detached front grille outlet with a soft brush or vacuum cleaner.

When cleaning inside the purifier, wipe with a soft, dry cloth.

If there is severe pollution, wipe with a damp cloth (do not use abrasives).
Take care that dust does not fall inside the purifier while cleaning.

3. Cleaning the particle sensor

Step1. Clean the particle sensor air inlet and outlet with a soft brush or vacuum cleaner.

Take care that dust does not fall inside the purifier while cleaning.

Step2. Open the particle sensor cover on the upper side of the purifier.

(Use the particle sensor cover slots to open the cover.) Wet a cotton ball with a small amount of water and wipe the lens, dust inlet, and outlet, then wipe again with a dry cotton ball to remove moisture.

If cleaning is not done regularly, the performance of the particle sensor may decrease.
Clean more often in very dusty environments.

4. Clean The Pre-filter

Step1. Pull both sides of the front cover to open.

Step2. Pull the pre-filter handle while taking it out to separate it from the fine dust filter.

Be careful that dust doesn’t fall out during removal.

Step3. Remove dust with water or a vacuum cleaner depending on the degree of contamination.

Be careful not to let dust enter the purifier while cleaning.

Step4. Push the completely dry pre-filter all the way into the purifier to install it.

Step5. Close the front cover again.

When you assemble the fine dust filter, be sure that the blue side of the filter must be at the front

How To Clean Coway Air Purifier AP-1512HH & AP-1512HH?

1. Cleaning the air quality sensor

Step1. Open the air quality sensor cover on the right-hand side of the product.

Step2. Clean the air inlet and outlet vent and then the air quality sensor with a soft brush or vacuum cleaner.

Step3. Wet a cotton swab lightly and clean the lens, dust inlet, and dust outlet. Clean them with a dry cotton swab to remove the remaining moisture.

Without regular cleaning, the performance of the air quality sensor deteriorates.
The cleaning cycle differs depending on the operating environment. When using the product in a dusty environment, clean the sensor more often.

2. Cleaning the air inlet and outlet

Clean the air inlet and outlet with a soft brush.

Exercise caution not to have dust fall inside the air purifier.
If covered in dust, run the air purifier in manual mode for 10 minutes to blow the dust off the vent. You may then continue with normal use.

3. Cleaning the front cover

Separate the front cover from the product and remove the dust attached to the surface with a soft dry brush or cloth.

Use a lightly wet cloth if the contamination is serious but do not use abrasives.

4. Cleaning the product body

Use a dry, soft cloth to clean the product.

Use a lightly wet cloth if the contamination is serious but do not use abrasives.

5. Cleaning the pre-filter

Step1. Open the front cover by pulling out the top part of it.

Step2. Press down on the top clip of the pre-filter and pull it out.

To prevent dust from falling off, remove the filter carefully without exerting a shock.

Step3. Clean the pre-filer with a vacuum cleaner or with water depending on the level of contamination.

Step4. Install the pre-filter after removing the moisture completely. Fit the front cover back to the product.

When refitting the pre-filter to the product, fit it in the hook correctly.

How often should I clean coway air purifier?

Filter	Cleaning time
Clean Pollution Sensor	(every two months).
Clean Main Body of Product	(every two to four weeks)
Clean Pre-filter	(every two to four weeks)
Cleaning the air inlet and outlet	(every 2 months)
Clean Fine Dust filter	Once / 4 months
Clean Deodorization filter	Once / 12 months
Clean HEPA filter	Once / 12 months

Final thoughts

This guide on how to clean coway air purifier will help you clean your air purifier easily with no effort and experience, The collector cell will work much better and clean the air more efficiently after regular cleaning.

This is an easy cleaning job that may seem hard to do, yet once you get the hang of the cleaning process it becomes second nature.

This machine will save money in the long run because it cleans and revitalizes the air without the use of expensive filters.